Kia Rio: Components Location
| 1. Converter housing 2. Shift cable bracket 3. Automatic transaxle case 4. Rear cover 5. Valve body cover |
6. Manual control lever 7. Air breather hose 8. Inhibitor switch 9. Solenoid valve connector |
Removal
1.
Remove the following items;
A.
Air cleaner assembly (A) and air duct (B).
(Refer to "Intake and Exhaust system" ...
See also:
Accelerator Pedal Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the accelerator position sensor connector (A). ...
Sunroof Motor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim. (Refer to the BD group - " Roof trim")
...
Transaxle Control Module (TCM) Terminal Function
Connector [EGGG-AA]
Pin
Description
Pin
Description
22
Shift solenoid D (VFS-OD)
73
Inhibitor switch signal "S4"
...
Copyright © www.kirmanual.com 2014-2024