Kia Rio: Front Impact Sensor (FIS) Description

The front impact sensor (FIS) is installed in the front side member. They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the FIS is to provide an indication of a collision. The FIS sends acceleration data to the SRSCM.

SRS Control Module (SRSCM) Variant coding

After replacing the SRSCM with a new unit, the “Variant Codingâ€� procedure must be performed.    1. ...

Front Impact Sensor (FIS) Components

...

See also:

Emergency while driving
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you h ...

Front Strut Assembly Inspection
1. Check the components for damage or deformation. 2. Compress and extend the piston rod (A) and check that there is no abnormal resistance ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...