Kia Rio: Valve Body Description - Hydraulic System - Automatic Transaxle System - Kia Rio UB 2012-2024 Service ManualKia Rio: Valve Body Description

The valve body is essential to automatic transaxle control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pressure regulator valves, oil redirection valves, shift valves, and manual valves. The body also features electronic solenoid valves that ensure smooth gear changes.

Valve Body Components Location


Fluid Replacement
   ATF of 6 speed automatic transaxle doesn’t need to be replaced. If the vehicle is used severely in business or personal ...

Valve Body Components Location
1. PCV adjust screw 2. Solenoid valve 3. Oil temperature sensor 4. Accumulator 5. Low & reverse brake(LR/B) pressure flow hole 6. Under drive brake (UD/B) pressur ...

See also:

Specification
[Throttle Position Sensor (TPS)] Throttle angle(°) Output Voltage (V) TPS1 TPS2 0 0.5 4.5 10 0.96 4.05 ...

Removal
1. Remove the fuel pump. (Refer to Engine Control/Fuel System - “Fuel Pump”) 2. Remove the ORVR valve (A) after releasing hooks (B). ...

Radiator: Inspection
Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, then install it to pressure tester. 2. Apply ...

Copyright © www.kirmanual.com 2014-2024