Kia Rio: Inhibitor Switch Description

Inhibitor Switch monitors the lever's position(PRND) and is used to control gear setting signals.

SS-B Solenoid Valve(ON/OFF) Installation

1. Installation is the reverse of removal.    • When installing ...

Inhibitor Switch Specifications

▷ Type: Combination of output signals from 4 terminals Power supply (V) 12 Output type Combination of output signals Signal Code Table ...

See also:

TJ Joint Installation
1. Wrap tape around the driveshaft spline(TJ) to prevent damage to the boot. 2. Using the alignment marks (D) made during disassembly as a ...

Rear Door Adjustment
Glass Adjustment    • Check the glass run channel for damage or deterioration, and re ...

Seat Belt Buckle Switch (BS) Removal
1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. ...