Kia Rio: Disaseembly| 1. |
Loosen the screw(6ea) and remove the lower cover (A) from the
steering wheel body.
|
| 2. |
Disconnect the heated steering wheel unit connector (A) and remove
the heated steering wheel unit (B) and wiring (C) and then loosen the
screw(2ea).
|
| 3. |
Remove the remote control assembly (A) from the steering wheel
body.
|
| 4. |
Installation is the reverse of the removal.
|
Removal
Heated Steering wheel DescriptionInspection
Sprockets, Hydraulic Tensioner, Chain
Guide, Tensioner Arm
1.
Check the CVVT sprocket, crankshaft sprocket teeth for abnormal
wear, cracks or damage. Repla ...
Foot Actuator (With Auto Defogging System) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the foot connector.
3.
Verify that the foot actuator operates to ...
Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)
Output Voltage (V)
TPS1
TPS2
0
0.5
4.5
10
0.96
4.05
...