Kia Rio: Inspection

Removal

1. Turn ignition switch OFF, and disconnect the negative (-) battery cable. 2. Remove the battery and ECM. (Refer to Engine Electr ...

Installation

1. Installation is the reverse of removal.    A. ...

See also:

Circuit Diagram
(M/T) (A/T) ...

Auto Defogging Sensor (FATC only) Replacement
1. Remove the auto defogging sensor cover (A). 2. Disconnect the connector (B) and then remove the auto defogging sensor (C). ...

Reassembly
1. Reassemble in the reverse order of disassembly.    • ...