Kia Rio: Installation

1.	Installation is the reverse of removal.

2.	Use a SST (09581-11000) when installing the brake caliper assembly.

3.	After installation, bleed the brake system. (Refer to Brake system bleeding)

Inspection

Front Brake Disc Thickness Check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

Rear Disc Brake

...

See also:

Oil Pressure Switch: Inspection
1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. ...

Installation
Rear Disc Brake Type 1. Install the parking brake cable. 2. Install the parking brake cable (A), and then install the clip (B ...

Power Mosfet (FATC) Inspection
1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of blower motor. 3. ...

Categories

Copyright © www.kirmanual.com 2014-2026