Kia Rio: Seat Belt Buckle Switch (BS) Removal| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
Remove the front seat assembly.
(Refer to the Body group - "Front seat")
|
| 3. |
Loosen the seat belt buckle mounting bolt and remove the seat
belt buckle switch.
|
Seat Belt Buckle Switch (BS) InstallationHeater & A/C Control Unit (FATC) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater & A/C controller (A) from the center facia using
a flat-head scre ...
Rear Shock Absorber Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Specification
Item
Specification
Coil Resistance (Ω)
1.5 [20°C(68°F)]
...