Kia Rio: Shift Lever Inspection
| 1. |
Check the select cable for proper operation and for damage.
|
| 2. |
Check the shift cable for proper operation and for damage.
|
| 3. |
Check the boots for damage.
|
| 4. |
Check the boots for wear abrasion sticking, restricted movement
or damage.
|
| 5. |
Check for the weak or damaged spring.
|
Shift Lever Removal
Shift Lever Assembly Replacement
1.
Remove the floor Interior console assembly.
(Refer to "Interior (Console)" in BD group)
...
Shift Lever Adjustment
1.
In neutral position, disjoin select cable (A) from shift lever
assembly pin (B).
2.
Disconnect select adjuster (A) to an arrow.
...
See also:
Fuses
A vehicle’s electrical system is protected from electrical overload damage by
fuses.
This vehicle has 2 fuse panels, one located in the driver’s side panel bolster,
the other in the engine ...
Replacement
Rear Brake Pads
1.
Loosen the guide rod bolt (B) and then remove the rear caliper
body (A).
Tightening torque:
21.6 ~ 31 ...
Hazard warning flasher lighting
The hazard warning flasher should be used whenever you find it necessary to stop
the car in a hazardous location. When you must make such an emergency stop, always
pull off the road as far as po ...
Categories
- Kia Rio Manuals Home
- Kia Rio YB 2017-2026 Owners Manual
- Kia Rio YB 2017-2026 Service Manual
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright www.kirmanual.com 2014-2026