Kia Rio: Specification

Description

Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engin ...

Signal Waveform

...

See also:

Inspection
Lighting Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul ...

Line Pressure Control Solenoid Valve Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Blower Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad and heater & blower unit assembly. (Refer to HA group – “He ...