Kia Rio: Specifications - BCM (Body Control Module) - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: Specifications

Item
Requirement
Remark
Rated voltage
DC 12V
Shall activate normally in these range.
Operating voltage range
DC 9 ~ 16V
Operating temperature range
-30°C ~ +75°C
(-22°F ~ +167°F)
Storage temperature range
-40°C ~ +85°C
(-40°F ~ +185°F)
Dark Current
Keyless (with security indicator)
5.5 ㎃
Measure when the state, all output loads are OFF and there are no Input SW(including TX operation) changes, continues 2sec.
SMK (with security indicator)
4.5 ㎃
Non keyless
3.0 ㎃

BCM (Body Control Module)
...

Components
...

See also:

Output Speed Sensor Signal Waveform
Fig 1) Input/Output speed sensor at low speed Fig 2) Input/Output speed sensor at high speed ...

Rear Coil Spring Inspection
1. Check the coil spring for crack and deformation. 2. Check the coil spring pad for damage and deformation. ...

Description
- EPS (Electronic Power Steering, Column assist type) system uses an electric motor to assist the steering force and it is an engine operation independent steering system ...

Copyright www.kirmanual.com 2014-2026