Kia Rio: SRS Control Module (SRSCM) Components

SRS Control Module (SRSCM) Description

The primary purpose of the Supplemental Restraints System Control Module (SRSCM) is to discriminate between an event that warrants restraint system deployment and an event that does not. The ...

SRS Control Module (SRSCM) Removal

1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

See also:

Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance ...

Components Location
1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) 5. Canister close valve (CCV) 6. Fuel level sensor (FLS) 7. ORV ...

Smart Key
Smart Key Code Saving 1. Connect the DLC cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. 2. ...