Kia Rio: Torque Converter Control Solenoid Valve (T/CON_VFS) Circuit Diagram

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54) Current value(mA ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Inspection

1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

See also:

Control System Composition
Fault Diagnosis Features a fail-safe mechanism that prevents dangerous situations from developing in the event of a transaxle failure. The limp home mode engages if the transaxle malf ...

Front Wheel Alignment
   When using a commercially available computerized wheel alignment equipment to inspect the front wheel alignment, always ...

Power Mosfet (FATC) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the power mosfet (B) after loosening the m ...