Kia Rio: 35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Direct control VFS[35R/C]
▷ Control type : Normal low type
| Control Pressure kpa (kgf/cm², psi) |
500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) |
| Current value(mA) |
50 ~ 850 |
| Internal resistance(Ω) |
5.1 |
35R Clutch Control Solenoid Valve(35R/C_VFS) Description
35R clutch control solenoid valve(35R/C_VFS) is attached to the valve
body. This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R clutch.
...
See also:
Removal
1.
Disconnect the brake fluid level switch connector, and remove
the reservoir cap.
2.
Remove the brake fluid from the master cylinder res ...
Inhibitor Switch Installation
1.
Check that the shift lever is placed in the "N" position
2.
Install the inhibitor switch (A).
...
Input Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
Copyright © www.kirmanual.com 2014-2019