Kia Rio: Front Disc Brake

Adjustment

Brake Pedal Height and Free Play 1. Disconnect the stop lamp switch connector (A). 2. Adjust the brake pedal height (A) as illustrat ...

Components

1. Guide rod bolt 2. Bleed screw 3. Caliper body 4. Caliper carrier 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

See also:

Rear combination lamp Installation
Rear combination lamp (Inside) [4 Door] 1. Install the rear combination lamp assembly. 2. Connect the rear combination connecto ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S termi ...

Fluid Components Location
1. Injection hole(eyebolt) 2. Oil level plug 3. Oil drain plug ...