1. |
Install the fog lamp.
|
2. |
Reconnect the fog lamp connector.
|
3. |
Connect the negative (-) battery terminal.
|
Power Mosfet (FATC) Inspection
1.
Turn the ignition switch ON.
2.
Manually operate the control switch and measure the voltage of
blower motor.
3.
...
Front Impact Sensor (FIS) Installation
•
Do not turn the ignition switch ON and do not contact
the battery cable while replacin ...
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions.
Refer to the chart below for the appropriate maintenance intervals.
R : Replace
I : I ...