Kia Rio: Fuel Tank Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Rio UB 2012-2019 Service ManualKia Rio: Fuel Tank Installation

1.
Installation is reverse of removal.

Fuel tank band installation nut:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

Fuel Tank Removal
1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line"). ...

Fuel Pump Removal
1. Release the residual pressure in fuel line (Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line"). ...

See also:

Ignition Switch Assembly Inspection
1. Disconnect the ignition switch connector (B) and key switch connector (A) from under the steering column. 2. Check for continui ...

Output Speed Sensor Description
The output speed sensor (A) is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM. The sensor provides ...

Radiator: Description
[Air conditioning type] The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A ...

Copyright © www.kirmanual.com 2014-2019