Kia Rio: Hood switch Inspection - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2019 Service ManualKia Rio: Hood switch Inspection

1.
Disconnect the hood switch connector (A).


2.
Check for continuity between terminals


Hood switch Description
The hood switch is included as the influencing factors in the calculation of the ISG function. If the hood is open, the engine must not be started or stopped by the ISG function for safety re ...

Hood switch Removal
1. After loosening the mounting bolts and connector, then remove the hood switch (A). ...

See also:

Measuring Body Dimensions
1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is ...

Power Door Lock Switch Inspection
Driver Door Lock Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim panel. (Refer to t ...

Interior Trim Components
[5 Door, 4 Door] 1 . Front pillar trim 2 . Center pillar upper trim 3 . Center pillar lower trim 4 . Rear pillar trim [5 Door] 5 . Front door scuff trim 6 . ...

Copyright © www.kirmanual.com 2014-2019