1. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
2. |
Measure the distance the steering wheel can be turned without
moving the front wheels.
|
3. |
If the play exceeds standard value, inspect the steering column,
shaft, and linkages.
|
1. |
Position the vehicle on a level surface and place the steering
wheel in the straight ahead position.
|
2. |
Attach a spring scale to the steering wheel. With the engine speed
900 ~ 1100rpm, pull the scale and read it as soon as the tires begin
to turn.
|
3. |
If the measured value exceeds standard value, inspect the power
steering gear box and MDPS system.
|
Installation
1.
Install in the reverse order of removal.
Battery (-)terminal installation
[with battery sensor] :
4.0 ~ 6.0 N.m (0.4 ~ 0.6 kgf. ...
Installation
When replacing the ECM, the vehicle equipped with immobilizer
must be performed the procedure as below.
...
Circuit Diagram
(M/T)
(A/T)
...