Kia Rio: Oil Pump Description - Hydraulic System - Automatic Transaxle System - Kia Rio UB 2012-2019 Service ManualKia Rio: Oil Pump Description

The oil pump is built-in as a single unit with the 26 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.

Oil Pump Components


Components Location
1. Automatic transaxle 2. Valve body assembly 3. Oil pump assembly ...

Oil Pump Components
1. Oil pump cover 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bushing-housing 7. Reaction shaft 8. Bushing-reaction shaft 9. Sleeve 10 ...

See also:

Seat Heater Switch Installation
1. Install the seat heater switch. 2. Install the console assembly. 3. Connect the battery (-) terminal. ...

ECM Terminal And Input/Output signal [M/T]
ECM Terminal Function (M/T) Connector [EGGM-AG] Pin No. Description Connected to 1 Injector (Cylinder #3) [High] control output ...

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the inject ...

Copyright © www.kirmanual.com 2014-2019