Kia Rio: Power Door Mirrors

Power Door Lock Switch Installation

1. Install the power window switch module. 2. Install the door trim panel after reconnecting the relevant connectors ...

Component Location

1. Power door mirror 2. Power door mirror switch 3. Folding mirror switch ...

See also:

Specifications
Item Requirement Remark Rated voltage DC 12V Shall activate normally in these range. Operating voltage range DC 9 ~ 16V ...

Removal
1. Disconnect the battery negative terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing") ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...