Kia Rio: Radiator: Description - Cooling System - Engine Mechanical System - Kia Rio UB 2012-2019 Service ManualKia Rio: Radiator: Description

[Air conditioning type]
The cooling fan operates in 2 stages (HIGH/LOW). The engine control module (ECM) controls the cooling fan according to the coolant temperature, vehicle speed and A/C operation.
[Cooling fan operation conditions]
A/C switch
A/C pressure
[kgf/cm² G (psi G)
Vehicle speed
[km/h (mph)]
Coolant temperature
[°C (°F)]
Cooling fan speed
OFF

V < 45 (28)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
ON
P < 6 (85.3)
All
105 (221) or above
HIGH
6 (85.3) ≤ P < 12 (170.7)
V < 45 (28)
45 ~ 100 (113 ~ 212)
LOW
100 (212) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
12 (170.7) ≤ P < 15.5 (120.5)
V < 45 (28)
-30 ~ 95 (-22 ~ 203)
LOW
95 (203) or above
HIGH
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212)
LOW
100 (212) or above
HIGH
80 (49.7) ≤ V
105 (221) or above
HIGH
15.5 (120.5) ≤ P
All
-30 (-22) or above
HIGH

[Non-Air conditioning type]
The cooling fan operates in single stage. The engine control module (ECM) controls the cooling fan according to the coolant temperature, and vehicle speed.
[Cooling fan operation conditions]
Vehicle speed
[km/h (mph)]
Coolant temperature
[°C (°F)]
Cooling fan operation
V < 45 (28)
95 ~ 100 (203 ~ 212) or above
On
45 (28) ≤ V < 80 (49.7)
95 ~ 100 (203 ~ 212) or above
On
80 (49.7) ≤ V
105 (221) or above
On

Radiator: Components
1.  Cooling fan & reservoir tank assembly 2.  Radiator lower hose 3.  Air guard 4.  Upper cover 5.  Radiator upper hose 6.  Filler neck ...

Radiator: Specifications
Item Specification Non - Air conditioning type Air conditioning type Fan type PULLER Fan speed control Resistor (On-Off) ...

See also:

Shift Lever Components
1. Shift lever knob 2. Shift lever assembly 3. Control cable 4. Shift lock cable assembly 5. Retainer 6. Brake pedal assembly ...

Front Strut Assembly Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Water pump: Removal and Installation
Water Pump 1. Drain engine coolant.    System is under high pre ...

Copyright © www.kirmanual.com 2014-2019