Kia Rio: Component Location

Horn

...

Inspection

Horn Inspection Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal. 1 : 12V Ground(-) 2 : 12V (+)    ...

See also:

Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Instrument Cluster Inspection
Speedometer 1. Adjust the pressure of the tires to the specified level. 2. Drive the vehicle onto a speedometer tester. Use wheel chocks ...