Kia Rio: License Lamp Removal - Lighting System - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: License Lamp Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the license lamp lens by pushing the clip (A).


3.
Replace the lamp bulbs (B) after turning the socket in the counter clock-wise direction from lens (A).


Overhead Console Lamp Installation
1. Install the overhead console lamp after connecting the sunroof switch connector and lamp connector. 2. Install the lens after tightening ...

License Lamp Installation
1. Install the bulb. 2. Connect the lens and license lamp. ...

See also:

Room Lamp Installation
Room Lamp 1. Install the room lamp assembly after connecting the room lamp connector. 2. Install the room lamp lens. ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor ...

Inhibitor Switch Circuit Diagram
...

Copyright www.kirmanual.com 2014-2026