Kia Rio: Rheostat Replacement| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the crash pad side switch assembly (A).
|
| 3. |
Disconnect the rheostat connector from lower crash pad switch.
|
| 4. |
Remove the rheostat switch.
|
| 5. |
The installation is the reverse of removal.
|
Hazard Lamp Switch Inspection
Front Fog Lamps RemovalFront Stabilizer Bar Replacement
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
DC/DC Converter: Circuit Diagram
In the ISG mode, if the power of an audio system turnsOFF by drawdown
while “Auto Starting” or “Idle Startingâ ...
Component
1. Remote control assembly
2. Airbag module
3. Wiring
4. Heated steering control unit
5. Steering wheel body
6. Lower cover
...