Kia Rio: Hazard Lamp Switch Inspection - Lighting System - Body Electrical System - Kia Rio UB 2012-2020 Service ManualKia Rio: Hazard Lamp Switch Inspection

1.
Operate the switch and check for continuity between terminals.



Hazard Lamp Switch Installation
1. Connect the connectors. 2. Install the hazard lamp switch. 3. Connect the negative (-) battery terminal. ...

Rheostat Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad side switch assembly (A). 3. ...

See also:

ECM Problem Inspection Procedure
1. TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis ground using the backside of ECM harness connector as ECM side check point. If the problem is fo ...

Heated Steering wheel System Circuit Diagram
Terminal Function Housing Pin Function Wire color Pad A GND Back B HEATER Yellow C ...

Seat Heater Switch Removal
1. Disconnect the battery (-) terminal. 2. Remove the console assembly. (Refer to the BD group - "Console") ...

Copyright © www.kirmanual.com 2014-2020