1. |
Disconnect the negative (-) battery terminal.
|
2. |
Disconnect the connect (A).
|
3. |
Remove the package tray trim.
(Refer to the BD group - "Interior trim")
|
4. |
Remove the high mounted stop lamp assembly (A) after loosening
2 screws.
|
5. |
Remove the high mounted stop lamp bulb (A) after turning in the
counter clockwise direction.
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Open the tailgate and remove the nuts. (3EA)
|
3. |
Remove the connector and the nozzle hose (A) from high mounted
stop lamp assembly (B).
|
Transaxle Control Module (TCM) connector and terminal function
...
Shift Lever Adjustment
Adjusting the control cable
1.
Set room side AT lever(shift lever) and automatic transaxle side
manual control lever to "N" position.
...
Starter: Cleaning
1.
Do not immerse parts in cleaning solvent. Immersing the yoke assembly
and/or armature will damage the insulation. Wipe these parts with a
cloth only.
...