Kia Rio: Head lamp leveling Device

Auto Light Sensor Installation

1. Reconnect the auto light connector. 2. Install the auto light sensor. ...

Component Location

1. Headlamp leveling device 2. Headlamp leveling actuator ...

See also:

Starter: Specification
Starter [Non-ISG type] Item Specification Rated voltage 12 V, 0.9 kW The number of pinion teeth 10 Performance [No-load, 1 ...

Power Mosfet (FATC) Inspection
1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of blower motor. 3. ...

Power Mosfet (FATC) Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) and then remove the power mosfet (B) after loosening the m ...