Kia Rio: Cruise Control Switch: Removal
| 1. |
Disconnect the battery (-) terminal.
|
| 2. |
Remove the air-bag module from the steering wheel. (Refer to Restraint
- "Driver Airbag (DAB) Module and Clock Spring")
|
| 3. |
Remove the steering wheel. (Refer to Steering System - "Steering
Column and Shaft")
|
| 4. |
Remove the steering wheel cover (A) after loosening 6 screws.
|
| 5. |
Remove the remote control switch after loosening 2 screws and
disconnecting the connector.
|
Cruise Control Switch: Installation
1.
Install in the reverse order of removal.
...
See also:
Engine compartment
1. Engine Coolant Reservoir
2. Engine Oil Filler Cap
3. Brake/Clutch Fluid Reservoir
4. Air Cleaner
5. Fuse Box
6. Negative Battery Terminal
7. Positive Battery Terminal
8. Radiator Cap
9. E ...
Underdrive Brake Control Solenoid Valve(UD/B_VFS) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor ...
Installation
Rear Disc Brake Type
1.
Install the parking brake cable.
2.
Install the parking brake cable (A), and then install the clip
(B ...
Categories
- Kia Rio Manuals Home
- Kia Rio YB 2017-2026 Owners Manual
- Kia Rio YB 2017-2026 Service Manual
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright www.kirmanual.com 2014-2026