Kia Rio: Inspection

Circuit Diagram

(M/T) (A/T) ...

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A) ...

See also:

Components Location
1. Battery sensor 2. Brake Booster Vacuum Pressure Sensor (BBVPS) 3. AGM battery 4. DC/ DC Converter (LDC) 5. ISG OFF Switch 6. Alternator 7. Starter 8. Brake s ...

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

Mirror Replacement
Outside Rear View Mirror Replacement    • When prying with a flat-tip screwdriver, wrap it w ...