Kia Rio: Description

Idle Stop & Go (ISG) function automatically switches off the engine when the car is at a standstill if the and starts it again as soon as the brake pedal is released. This not only reduces fuel consumption, it also lowers emissions. Idle Stop & Go (ISG) function also has a built-in sensitivity to driving safety and comfort.

The engine is not switched off if certain conditions relating to safety and comfort have not been fulfilled (For example, when the engine oil is still cold, when the battery is running low or when the outside temperature is below 3°C). It can be deactivated by pressing the ISG OFF switch on the crash pad lower panel.

Sample scenario: switching off the engine at a standstill at a red traffic light or in stop-and-go traffic.

ISG (Idle Stop & Go) System

...

Operation

1. Vehicle moving. 2. The transmission lever position is D-range. The brake pedal is released. 3. The ...

See also:

Smart key
With a smart key, you can lock or unlock a door and even start the engine without inserting the key. The functions of the buttons on a smart key are similar to the remote keyless entry. (Refer ...

Thermostat: Troubleshooting
Symptoms Possible Causes Remedy Coolant leakage • From the thermostat gasket Check the mounting ...

Brake Booster Vacuum Pressure Sensor: Inspection
1. Check installation status of BBVPS and Vacuum hose or damage of vacuum hose. 2. Connect GDS to DLC (Data Link Cable). ...