Kia Rio: Door Switch Inspection - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2026 Service ManualKia Rio: Door Switch Inspection

1.
Remove the door switch and check for continuity between the terminals.



Door Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follo ...

Door Switch Removal
1. Remove the door switch (A) after loosening the bolt. ...

See also:

Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation and fresh ai ...

Tire Wear
   • Using tires and wheel other than the recommended sizes could cause unusual handling ...

Front Hub / Knuckle Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) fro ...

Copyright © www.kirmanual.com 2014-2026