Kia Rio: Transaxle Oil Temperature Sensor Description

Transaxle oil temperature sensor monitors the automatic transaxle fluid's temperature and conveys the readings to TCM. It is an NTC (Negative Thermal Coefficient) sensor whose resistance has an inversely proportional relationship with the temperature level. Data produced by this sensor is used to identify damper clutch activation and deactivation zones within the low temperature and high temperature range and to compensate hydraulic pressure levels during gear changes.

Transaxle Control Module (TCM) Installation

1. Installation is reverse of removal.    In the case of the vehicle equipp ...

Transaxle Oil Temperature Sensor Specifications

▷ Type: Negative Thermal Coefficient Type Temp.[(°C)°F] Resistance (kΩ) (-40)-40 48.1 (-20)-4.0 15.6 (0)32.0 ...

See also:

Radiator: Specifications
Item Specification Non - Air conditioning type Air conditioning type Fan type PULLER Fan speed control Resistor (On-Off) ...

Installation
1. Install the intake CVVT (A) and exhaust CVVT (B). Tightening torque : 63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft) ...

Blower Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad and heater & blower unit assembly. (Refer to HA group – â ...