Kia Rio: Rear Disc Brake

Installation

1. Installation is the reverse of removal. 2. Use a SST (09581-11000) when installing the brake caliper assembly. 3 ...

Components

1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...

See also:

Installation
1. Installation is in reverse order of removal. ...

Engine compartment
1. Engine Coolant Reservoir 2. Engine Oil Filler Cap 3. Brake/Clutch Fluid Reservoir 4. Air Cleaner 5. Fuse Box 6. Negative Battery Terminal 7. Positive Battery Terminal 8. Radiator Cap 9. E ...

SRS Control Module (SRSCM) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...