|
1. |
Using a screwdriver or remover, remove the outside rear view mirror
cover (A).
|
2. |
After loosening the mounting bolts, then remove the outside rear
view mirror (A).
|
3. |
Disconnect the outside rear view mirror connector (A).
|
4. |
Installation is the reverse of removal.
|
1. |
Loosen the mounting screw (C).
|
2. |
Push the inside rear view mirror base (B) up to remove to inside
rear view mirror assembly (A).
|
3. |
Installation is the reverse of removal.
|
Tightening Torques
Item
N.m
kgf.m
lb-ft
Ignition coil installation bolt
9.8 ~ 11.8
1.0 ~ 1.2
7.2 ~ 8.7
Spark plug installation
14.7 ~ ...
Replacement
Problems And Replacement Parts:
Problem
Part set
Scan tool required?
All keys have been lost
Blank key (4)
YES
Antenna coil unit does n ...
Brake Switch Description
The present brake switch is used as an input variable for the ISG function
to detect bracke operation.
...