Kia Rio: Seat Heater Switch Schematic Diagram

Seat Heater Inspection

Driver seat and Passenger seat 1. Check for continuity and measure the resistance between terminals. [Cushion] Pin No. ...

Seat Heater Switch Removal

1. Disconnect the battery (-) terminal. 2. Remove the console assembly. (Refer to the BD group - "Console") ...

See also:

CVVT (Continuously Variable Valve Timing) System: [CVVT System Mode]
(1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...

Installation
1. Connect the horn connector, then reassemble the horn. ...

Cluster Ionizer (FATC only) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the glove box. (Refer to BD group - "Crash Pad") ...