Kia Rio: SS-B Solenoid Valve(ON/OFF) Description - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2020 Service ManualKia Rio: SS-B Solenoid Valve(ON/OFF) Description

SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body.

SS-B Solenoid Valve(ON/OFF) Specifications


SS-A Solenoid Valve(ON/OFF) Installation
1. Installation is the reverse of removal.    Х When installing, ...

SS-B Solenoid Valve(ON/OFF) Specifications
ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(&# ...

See also:

Components
...

Thermostat: Troubleshooting
Symptoms Possible Causes Remedy Coolant leakage Х From the thermostat gasket Check the mounting bo ...

Rain Sensor Inspection
Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the ...

Copyright © www.kirmanual.com 2014-2020