Kia Rio: SS-B Solenoid Valve(ON/OFF) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Rio UB 2012-2019 Service ManualKia Rio: SS-B Solenoid Valve(ON/OFF) Specifications

ON/OFF Solenoid Valve(SS-A, SS-B)
▷ Control type : Normal low type
Control pressure kpa (kgf/cm², psi)
490.33(5.0, 71.12)
 Internal resistance(Ω)
10 ~ 11

SS-B Solenoid Valve(ON/OFF) Description
SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

SS-B Solenoid Valve(ON/OFF) Circuit Diagram
...

See also:

Alternator: On-vehicle Inpection
   Check that the battery cables are connected to the correct terminals. ...

Heater & A/C Control Unit (MANUAL) Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C controller (A) from the center facia using a flat-head scre ...

BJ Boot Replacement
1. Remove the front driveshaft. (Refer to DS group - Front Driveshaft) 2. Remove the TJ joint assembly. (Refer to DS group - TJ Joint) ...

Copyright www.kirmanual.com 2014-2019