Kia Rio: Alternator: Specification - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Rio UB 2012-2026 Service ManualKia Rio: Alternator: Specification

Items
Specification
 ISG Alternator
Rated voltage
13.5V, 110A
Speed in use
1,000 ~ 18,000rpm
Voltage regulator
IC Regulator built-in type
Regulator setting voltage
External mode
ECU control
Internal mode
 14.55 ± 0.3V
Temperature compensation
External mode
0 ± 3mV / °C
Internal mode
-3.5 ± 2mV / °C

Alternator: Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC curre ...

Alternator: On-vehicle Inpection
   • Check that the battery cables are connected to the correct terminals. ...

See also:

Limp Home Function
1. Limp Home By Tester If the ECM detects the fault of the Immobilizer or transponder, the ECM will allow limp home function of the immobilizer. Limp home is o ...

Radiator: Inspection
Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, then install it to pressure tester. 2. Apply ...

Steering Gear box Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Copyright www.kirmanual.com 2014-2026