Kia Rio: Circuit Diagram

Component Location

1. Auto light sensor 2. Head lamps 3. Lighting switch (Auto) 4. Tail lamps 5. BCM (Body Control Module) ...

Auto Light Switch Inspection

Operate the auto light switch, then check for continuity between terminals of multi-function switch connector. ...

See also:

Vehicle parasitic current inspection
1. Turn the all electric devices OFF, and then turn the ignition switch OFF. 2. Close all doors except the engine hood, and then lock all d ...

Overhead Console Lamp Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp lens (B). 3. After ...

Replacement
The injector combustion seal should be replaced new one to prevent leakage after removing the injector. 1. Remove the combustion seal (A) with a wire cutter. ...