1. |
Remove the wiper arm cover (B).
|
2. |
After loosening the mounting nuts, then remove the wiper arm (A).
|
3. |
Remove the washer nozzle hose (B).
|
4. |
Detach the clips, then remove the cowl top cover (A).
|
5. |
Installation is the reverse of removal.
|
Heater & A/C Control Unit (MANUAL) Schematic Diagram
...
Components
[Front]
(5 Door, 4 Door)
1. Front seat belt
2. Height adjust
3. Front seat belt anchor pretensioner (NA : North america)
[Rear]
...
Rain Sensor Inspection
Rain Sensing Wiper
1.
In IGN2 ON state, if auto switch input (LIN communication) is
ON then both wiper low relay and wiper high relay outputs are controlled
by the ...