Kia Rio: Front Hub / Knuckle Inspection - Front Axle Assembly - Driveshaft and axle - Kia Rio UB 2012-2026 Service ManualKia Rio: Front Hub / Knuckle Inspection

1.
Check the hub for cracks and the splines for wear.
2.
Check the brake disc for scoring and damage.
3.
Check the knuckle for cracks.
4.
Check the bearing for cracks or damage.
Front Hub / Knuckle Reassembly
1. Install the hub bearing to the knuckle assembly. (1) Lay the knuckle assembly (A) on press. (2) ...

Driveshaft Assembly
...

See also:

Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

OBD-II review
1. Overview The California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model year. The first phase, O ...

Installation
1. Connect the horn connector, then reassemble the horn. ...

Copyright www.kirmanual.com 2014-2026