Kia Rio: High Mounted stop lamp Removal - Lighting System - Body Electrical System - Kia Rio UB 2012-2026 Service ManualKia Rio: High Mounted stop lamp Removal

[4 Door]
1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connect (A).


3.
Remove the package tray trim.
(Refer to the BD group - "Interior trim")
4.
Remove the high mounted stop lamp assembly (A) after loosening 2 screws.



5.
Remove the high mounted stop lamp bulb (A) after turning in the counter clockwise direction.


[5 Door]
1.
Disconnect the negative (-) battery terminal.
2.
Open the tailgate and remove the nuts. (3EA)


3.
Remove the connector and the nozzle hose (A) from high mounted stop lamp assembly (B).


Front Fog Lamps Inspection
Multifunction Switch(Lighting) 1. Disconnect the negative(-) battery terminal. 2. Remove the lighting switch of the multi-function switch. ...

High Mounted stop lamp Installation
[4 Door] 1. Install the high mounted stop lamp assembly. 2. Install the package tray trim. 3. Connect the n ...

See also:

Torque Converter Control Solenoid Valve (T/CON_VFS) Description
Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...

Condenser Inspection
1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdrive ...

Line Pressure Control Solenoid Valve Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Copyright www.kirmanual.com 2014-2026