Kia Rio: Removal

Inspection

Horn Inspection Test the horn by connecting battery voltage to the 2 terminal and ground the 1 terminal. 1 : 12V Ground(-) 2 : 12V (+)    ...

Installation

1. Connect the horn connector, then reassemble the horn. ...

See also:

Component Location
1. Head cap 2. Nut 3. Rear wiper arm & Blade 4. Packing (rubber) 5. Rear wiper motor assembly 6. Bolt ...

Inspection
1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform� ...

Heater & A/C Control Unit (FATC) Self Diagnosis
1. Self-diagnosis process 2. How to read self-diagnostic code During the self-diagnosis, the corresponding fault code flickers ...