Kia Rio: Removal| 1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
| 2. |
Lift the vehicle.
|
| 3. |
Remove the fuel tank.
(Refer to Engine Control/Fuel System - "Fuel Tank")
|
| 4. |
Disconnect the vapor tube quick-connector (A) and the vapor hose
(B).
|
| 5. |
Remove the canister assembly after removing installation bolts
(C).
|
Canister
InspectionLubricants
Items
Specified lubricants
Quantity
Input shaft spline
CASMOLY L9508
0.2g
Clutch release cylinder assembly
Brake flu ...
Front Stabilizer Link Inpesction
Check the front stabilizer link ball joint for damage.
-
Torn boot
-
Opened boot
-
Displaced ring
...
TPMS Receiver Diagnosis procedure by using diagnostic device
As manual for diagnosis methods by using diagnosis device, the main contents
are as follows:
1.
Connect self-diagnosis connector(16pins) located in the lower
of driv ...