Kia Rio: Removal

On-board Refueling Vapor Recovery (ORVR) valve

...

Installation

1. Install in the reverse order of removal. ...

See also:

Installation
   • Do not spill brake fluid on the vehicle: it may damage the paint; if brake fluid doe ...

Removal
1. Disconnect the brake fluid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder res ...

Hazard Lamp Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or trim remover, remove the hazard lamp switch (A). ...