Kia Rio: Seat Heater Switch Schematic Diagram

Seat Heater Inspection

Driver seat and Passenger seat 1. Check for continuity and measure the resistance between terminals. [Cushion] Pin No. ...

Seat Heater Switch Removal

1. Disconnect the battery (-) terminal. 2. Remove the console assembly. (Refer to the BD group - "Console") ...

See also:

Inspection
1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve ...

Installation
1. Installation is the reverse of removal. 2. After installation, bleed the brake system. (Refer to Brake system bleeding) ...

Front Strut Assembly Replacement
1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9N.m(9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...