Kia Rio: Head Lamps Removal
Head Lamp
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the radiator grille upper cover (A), after loosening the
mounting clips.
|
| 3. |
Loosening the head lamp mounting bolts (2EA) and disconnect the
head lamp connector (A). Then, remove the head lamp assembly (B).
|
| 4. |
Remove the dust cap(A) and disconnect the connector. Then remove
the head lamp (high / low) bulb(B).
|
| 5. |
Remove the turn signal lamp bulb.
|
Head Lamps Component
1. Head lamp assembly lens & housing
2. Head lamp bulb (Low)
3. Head lamp bulb (High)
4. Dust cover
5. Turn signal lamp bulb
6. Socket
...
Head Lamps Installation
1.
Install the head lamp assembly after connecting the connector.
2.
Install the radiator grille upper cover.
3.
...
See also:
Installation
1.
Installation is the reverse of removal.
A.
...
Foot Actuator (With Auto Defogging System) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the foot connector.
3.
Verify that the foot actuator operates to ...
Windshield Wiper-Washer Switch Inspection
Wiper And Washer Switch Inspection
With the multifunction switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified, replace
...
Categories
- Kia Rio Manuals Home
- Kia Rio YB 2017-2026 Owners Manual
- Kia Rio YB 2017-2026 Service Manual
- Kia Rio UB 2012-2017 Owners Manual
- Kia Rio UB 2012-2017 Service Manual
- Downloads
Copyright www.kirmanual.com 2014-2026