Kia Rio: Power Mosfet (FATC) Replacement - Blower - Heating,Ventilation, Air Conditioning - Kia Rio UB 2012-2026 Service ManualKia Rio: Power Mosfet (FATC) Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Disconnect the connector (A) and then remove the power mosfet (B) after loosening the mounting screws.


3.
Install in the reverse order of removal.
Power Mosfet (FATC) Inspection
1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of blower motor. 3. ...

Climate Control Air Filtar Description
The climate control air filter is located in the bower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventional dust fil ...

See also:

SS-B Solenoid Valve(ON/OFF) Specifications
ON/OFF Solenoid Valve(SS-A, SS-B) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12)  Internal resistance(&# ...

Description
Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. Whe ...

Thermostat: Removal
   Disassembly of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. ...

Copyright www.kirmanual.com 2014-2026