Kia Rio: Heater & A/C Control Unit (MANUAL) Schematic Diagram

Heater & A/C Control Unit (MANUAL) Components

Connector pin function Connector Pin No Function Connector Pin No Function A 1 Ground B 18 Intake Actu ...

Heater & A/C Control Unit (MANUAL) Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the heater & A/C controller (A) from the center facia using a flat-head scre ...

See also:

Line Pressure Control Solenoid Valve Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

CVVT (Continuously Variable Valve Timing) System: [CVVT System Mode]
(1) Low Speed / Low Load (2) Part Load (3) Low Speed / High Load (4) High Speed / High Load ...

Description
Idle Stop & Go (ISG) function automatically switches off the engine when the car is at a standstill if the and starts it again as soon as the brake pedal is released. This not only reduce ...